Used injection molding machine / D-1367
Used Ferromatik Milacron (Klöcker) FX50 R 35 injection molding machine in very good condition with two mold temperature control units. Reliable and precise machine for the production of high-quality plastic parts in small to medium quantities.
General data: Dry run rate: 40 min, pump drive: 15 kW, total connected load: 25.7, oil tank capacity: 180 L
Injection unit:
- Screw diameter: 35 mm
- Injection pressure: 1730 bar
- Displacement: 116 cm3
- Screw stroke: 120 mm
- Max. injection part weight: 99 g
- Maximum injection flow: 505 g/s
- Calculated injection power: 15 kW
- Plasticizing flow: 29 g/s
- Screw length: 22 LID
- Maximum screw speed: 430 min
- Maximum screw torque: 360 Nm
- Installed heating power: 10.7 kW
- Number of heating zones: 5
- Nozzle compression force: 65 kN
Clamping unit:
- Clamping force: 500 kN (approx. 50 t)
- Mold opening stroke: 350 mm
- Mold installation height min.: 200 mm
- Plate spacing max.: 550 mm
- Ejector force: 34 kN
- Ejector stroke: 150 mm
- Maximum column spacing: 355 x 355 mm
- Maximum clamping plate: 540 x 540 mm
Used injection molding machine technical data
Name:
Used injection molding machine
Manufacturer:
Ferromatik Milacron (Klöcker)
Type:
FX50 R 35
Year built:
1991
CardaID:
D-1367
Driving force:
15 kW
Hours of operation:
2.000 h
Dimensions:
L 4.300 x W 1.400 x H 2.200 mm
Empty weight:
4.200 kg
Technical doc.:
Yes
Message:
General Data:
Dry cycle rate: 40 min, pump drive: 15 kW, total connected load: 25.7, oil tank capacity: 180 L
Injection unit:
Screw diameter: 35 mm, injection pressure: 1730 bar, displacement: 116 cm3, screw stroke: 120 mm, maximum part weight: 99 g, maximum injection flow: 505 g/s, calculated injection capacity: 15 kW, plasticizing flow: 29 g/s, screw length: 22 LID, maximum screw speed: 430 min, maximum screw torque: 360 Nm, installed heating capacity: 10.7 kW, number of heating zones: 5, nozzle compression force: 65 kN
Clamping unit:
Clamping force: 500 kN, mold opening stroke: 350 mm, tool installation height min.: 200 mm, plate space max.: 550 mm, ejector force: 34 kN, ejector stroke: 150 mm, clear distance between columns max.: 355×355 mm, clamping plate max.: 540×540 mm.
Accessories:
With two tool tempering devices
Condition:
Second hand
Price:
By request
